Dn10-100 Straight Through Type Electric PVC Double Union Ball
Valve
Product Description:
Electric PVC Double Union Ball Valve/ IP67 /Fixed Ball Valve
Description:
PVC union ball valve has strong corrosion resistance because of its UPVC body to besuitable for
acid, alkali and chemical solution.
Light weight and anti-corrosive make this valve apply in pure water and raw drinking water, drainage
and sewage, salt water and sea water.
Specification:
| Power supply | AC220V ,AC24V |
| Valve size | DN10-100 |
| Medium Temp | -15°C~ 60°C(no congelation) |
| Ambient Temp | -25°C~ 55°C |
| Operating pressure | PN16 |
| Action mode | Switch to cut off,0 ~ 90°gyration |
| Action time | 4 ~ 30S |
| Protector | Overheat protection |
| Power consumption | 8VA ~ 30VA |
| Body connections | Flange, inside thread |
| Body material | UPVC |
| Seal material | PTFE,EPDM |
| Actuator material | Casting aluminum alloy, plastic shell |
| Applicable medium | Water, air, oil, and corrosive chemical liquid |
| Protection level | IP67 |
| Installation mode | Install it in any angle. (Prefer to horizontal or inclined
installation to extend the service life) |
Figure and connection size
Size |
Thread(G) | A | A Adhesive interface | B | C Thread connection | C Adhesive interface | D | E | F | G | H | L | φM |
3/8″ | 103 | 103 | 8.3 | 3/8″ | 16 | 36 | 31.5 | 24 | 24 | M4 | 63 | 10 |
1/2″ | 110 | 103 | 8.3 | 1/2″ | 20 | 36 | 31.5 | 24 | 24 | M4 | 63 | 15 |
3/4″ | 116 | 115 | 11 | 3/4″ | 25 | 43.5 | 36.5 | 25 | 31 | M4 | 73 | 20 |
1″ | 133 | 128 | 12.1 | 1″ | 32 | 51 | 45 | 27 | 40 | M5 | 90 | 25 |
1″1/4 | 145 | 146 | 14.5 | 1″1/4 | 40 | 59 | 52 | 32 | 41 | M5 | 104 | 32 |
1″1/2 | 165 | 164 | 15.5 | 1″1/2 | 50 | 68 | 56 | 28 | 53 | M6 | 112 | 40 |
2″ | 199 | 199 | 19 | 2″ | 63 | 82 | 67.5 | 34 | 58 | M6 | 135 | 50 |
2″1/2 | 236 | 235 | 23.2 | 2″1/2 | 75 | 115 | 79 | 45 | 84 | M6 | 105 | 65 |
3″ | 270 | 270 | 28.3 | 3″ | 90 | 138.5 | 100 | 55 | 102 | M8 | 126 | 80 |
4″ | 309 | 308 | 28.6 | 4″ | 110 | 162.5 | 115 | 50 | 122 | M8 | 147 | 100 |
The material for main parts
Material |
1. Shaft | PVC | 7. Ball seal ring | PTFE |
2. O-Ring | EPDM | 8. Ball core | PVC |
3. Ring nut | PVC | 9. O-Ring | EPDM |
4. Body | PVC | 10. Plug seal bracket | PVC |
5. The end | PVC | 11. Ring | PVC |
6. O-Ring | EPDM | |
|
Control Diagram
| Model | Circuit | Model | Circuit |
| S | ON/OFF,no output signal | CPT | ON/OFF,output 4~20mA signal |
| MS | ON/OFF,output passive contact signal | PCU | Regulation,output 4~20mA signal |
Packing & Shipping:
1.Packing: inner with bubble wrap,outer with cardboard box and wooden case.
2.Transportation:by sea, by air,by train.
If you have other requirements, please feel free to tell us.
